One of the best ways to ensure the safety of your drinking water and the health of those around you is to install a home water filter system. If you’re looking for an effective way to purify your drinking water at home, there are a lot of options out there. If you’re looking for water filters that are easy to use and maintain, you can’t go wrong with the Everpure H300 filter.
The H300, like other Everpure water filtering systems, is designed to be simple to install by any homeowner. This means that there is no need to pay an expensive plumber to install a new H300 water filter. FAll you need are a few simple hand tools required to finish the full installation process.
Just screw the filter head into your cabinet, add a little adaptor to your cold water intake, and cut hoses to link them. All that’s left is to connect the water output to the water dispenser after the filter cartridge is fitted in place. Hire a handyman if you don’t want to deal with the hassle of doing this yourself, but the team at Everpure really made these filters simple to install.
You may be wondering if you really need a dedicated filtration system. Filtered water pitchers are the most popular choice for most water purification at home. Despite their low price and ease of use, these filters require routine refills daily and are only meant to last for as little as 40 gallons per filter. Overall, they take up a lot of room in your fridge while providing subpar water quality at the same time. Everpure drinking water filters are meant to be fitted beneath your kitchen sink and deliver their filtered water through a separate filtered water faucet.
Installing a dedicated faucet for the Everpure H300 filter is necessary for dispensing water from the unit. These drinking water faucets may be mounted on your countertop or a flat metal surface of your sink, depending on your preference and accessibility. This is one of the most challenging components of integrating the H300 into your kitchen. Assuming you’re renovating your kitchen and intend to add a filter, it’s simple enough to drill a hole in the countertop or buy an existing sink with an accessory hole already fitted.
Keeping the Everpure H300 filter system in good working order requires little more than an occasional checkup. There is a simple timer strip included with each filter cartridge. The pane on this timer gradually changes from white to red over time. To tell when it is time to replace the filter, a solid red strip will appear after roughly a year of use. Another clue that your filter needs to change sooner rather than later is when your system’s flow rate begins to slow down before a year has gone by.
Luckily the replacement process is also extremely easy. It’s as simple as flipping the shut-off valve on your Everpure H300 water filter head, removing the used water filter cartridge, and inserting your new filter cartridge in its place. As soon as a fresh cartridge is installed, run the system for several minutes to remove any remaining air from the system lines.
Since the H300 is one of the most advanced water purification systems available, it’s an excellent choice for your kitchen. These filters are not only effective, but they are also exceedingly simple to use and manage. Let Everpure water filtering systems do the work for you, so you don’t have the inconvenience of constantly re-filling your water pitcher for water that has been crudely filtered. Visit efilters.net for more information on Everpure Water Systems.