Sat. Sep 30th, 2023

Magnetic door catchers have increasingly become a household favorite, providing an elegant solution to keep doors open or closed. Their non-obtrusive design and efficient function make them a top choice for homeowners seeking both style and practicality. If you’ve recently purchased one and are wondering how to get it set up, worry not! Here’s a step-by-step guide to help you through the process.


Understanding the Components:

A typical magnetic door catcher set consists of a magnet, usually encased in a metal or plastic housing, and a metal plate or counter-piece. The magnet gets affixed to the door while the metal plate is attached to the wall or door frame.


  1. Gather Your Tools:

Before starting, ensure you have the following tools on hand:


Screwdriver (or a drill, if you prefer)

Measuring tape or ruler

Pencil or marker

Level tool (optional but recommended)


  1. Choose the Placement:

Decide where you want the magnetic door catcher to be placed. Typically, it’s installed on the lower section of the door to avoid any tripping hazards.


  1. Mark the Spots:

Measure the distance from the floor and mark the desired height on both the door and the corresponding wall or door frame. Use the level tool to ensure straight and aligned markings.


  1. Attach the Metal Plate:

Most metal plates come with pre-drilled holes. Align this with the mark on your wall or door frame. Using the screws provided (or those suitable for your wall type), secure the metal plate.


  1. Fix the Magnetic Catcher:

Similarly, align the magnetic catcher with the marking on the door. Ensure that when the door closes, the magnet aligns perfectly with the metal plate. Attach it using screws.


  1. Test the Alignment:

Close the door gently to see if the magnet catches the metal plate effectively. It should hold the door securely without any slippage.


  1. Adjust if Necessary:

If the door doesn’t catch or if there’s any misalignment, adjust the position of the magnet or metal plate accordingly and tighten the screws.


  1. Test the Strength:

Gently pull the door to ensure the magnet holds but releases when needed. Remember, while it should hold the door effectively, it shouldn’t require excessive force to separate them.


Bonus Tips:


Always choose a magnetic door catcher strength suitable for your door’s weight. Heavier doors might require stronger magnets.

For added strength, some homeowners opt to install two magnetic catchers – one at the top and one at the bottom of the door.

Ensure the door surface and the wall or frame are clean and free from dust or grease before installation. This ensures better adhesion and function.



Installing a magnetic door catcher is a relatively straightforward DIY task that adds both functionality and a touch of modern design to your home. By following these steps and ensuring accurate measurements, you’ll have a door that stays precisely where you want it to. Enjoy the convenience and aesthetics of your newly installed magnetic door catcher!


PERMAG Products is a leading supplier of drawer separator, and we are committed to providing our customers with the highest quality products available on the market. Thanks to our state-of-the-art manufacturing process, we are able to produce magnetic rods that meet the most stringent quality standard.

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment Rules

  • Please show respect to the opinions of others no matter how seemingly far-fetched.
  • Abusive, foul language, and/or divisive comments may be deleted without notice.
  • Each blog member is allowed limited comments, as displayed above the comment box.
  • Comments must be limited to the number of words displayed above the comment box.
  • Please limit one comment after any comment posted per post.