Fri. Jun 9th, 2023

When your tyres show danger signs, you have to change them immediately. These signs include tread wear, poor performance, vibrations, strange noises, and bulges or cracks on the sidewall. Wise drivers do not ignore these signs and change the present set of tyres immediately.

A number of drivers avoid the danger signs and drive with faulty tyres. Faulty tyres usually lead to problems that occur suddenly in the middle of the road. Even if drivers drive their vehicles with perfect Mazda Tyres Northampton, there are several reasons that will lead to sudden driving emergencies.

In this blog, we will talk about the most common driving emergencies.


Most car drivers are familiar with tyre punctures. Punctures in tyres take place when an iron nail, screw or any similar pointed object pierces the body of your car tyre.

However, the damaged area is not very wide but it allows the air to go out of the tyre quickly. As a result, you get a flat tyre on a quiet highway.

This issue is not extremely problematic if you have a spare tyre and toolbox in your vehicle. You have to replace the faulty tyre with spare after parking the car at a safe place.

Do not drive your car on a flat tyre. Driving on flat tyres may damage the suspension components. Therefore, it is better you park your car and try to replace your faulty tyre.

You may have a puncture repair kit as well if you have one. The sealant will fill the hole temporarily. You have to repair the tyre permanently in the future by visiting a garage.

Calling a mobile tyre fitting service is also a good idea. These services send mobile vans to a mechanic to fix the issue.

How to avoid punctures?

Sharp and pointed objects are present on roads. Therefore, It is very tough to avoid punctures. You have to be prepared to face the situation successfully.

You can reduce the chances of punctures if keep tread depth at the optimum level and maintain proper air pressure in the tyres.


Blowouts take place due to several reasons. You must have seen tyres exploding with a loud sound on the roads. These incidents are not safe for car drivers and other road users.

A driver may lose control of the vehicle because of a blowout.

Common reasons for a tyre burst include extreme heat, friction and speed. These factors degrade the tread rubber that may further cause a serious blowout. Similarly, high air pressure will create pressure on the wall of the tyre and it will blow out as a result.

The wrong air pressure also invites blowouts. Low air pressure increases the contact area which further increases the level of heat and friction. As a result, tyres with low air pressure

Blowouts happen due to manufacturing defects as well. However, it would not be a rare case if you bought car tyres from a trusted brand.

If your tyres have cracks or bulges on their sidewall, even a single hit with a pothole or any hard object may result in a serious blowout.

How to avoid blowouts?

First of all, you should never drive your car on worn tyres. Worn tyres are more prone to blow out due to a thinner wall of the tread. Moreover, keep the proper air pressure in tyres to save them from tyre bursts. Save your tyre from the heat by taking frequent breaks during your journey. Moreover, whenever you park your vehicle, choose a place that is away from direct sunshine.


Your tyres may face hydroplaning in wet road conditions. Hydroplaning is a condition in which a layer of water will come in between your tyres and the road surface. As a result, your tyres will run for a couple of moments without making a proper grip on the road surface. Finally, your vehicle will skid on the road surface.

There are many factors that determine the severity level of hydroplaning. For example, tread pattern, tread depth, the height of the water, air pressure, and speed of the vehicle.

How to avoid hydroplaning?

You may observe that you will reduce the chances of hydroplaning if you consider the following points:

  • Drive with tyres that have perfect tread patterns to keep extra water away.

  • Drive with tyres that have proper tread depth.

  • Always keep the air pressure in your tyres at the optimum level.

  • Do not drive your vehicle at a high speed on wet roads.

  • Avoid standing water.

Slush planning:

Slush planning is more dangerous than hydroplaning. In this phenomenon, your cat tyres may slip on slush and this condition may take place at a speed of 50 to 60 km/h on a snowy road surface. Generally hydroplaning takes place at the speed of 70 to 80km/h. So, you can see the difference.

Just like hydroplaning, your car tyres lose traction suddenly on slush due to a layer of slush. This condition takes place when your tyres are unable to channel extra slush effectively.

How to avoid slush planning?

You can avoid slush planning by buying a set of winter tyres. Winter tyres are very effective in channelling ice and slush because of their tread pattern. Do not forget to maintain proper air pressure in your winter tyres. Moreover, do not prefer Cheap Tyres Northampton for severe winter tyres. only branded tyres will show proper endurance in cold conditions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment Rules

  • Please show respect to the opinions of others no matter how seemingly far-fetched.
  • Abusive, foul language, and/or divisive comments may be deleted without notice.
  • Each blog member is allowed limited comments, as displayed above the comment box.
  • Comments must be limited to the number of words displayed above the comment box.
  • Please limit one comment after any comment posted per post.